產品用途:用于吸收性基層的處理。
特點:
●水性乳液,環保;
●封底、降低基層吸收性;
●粘接架橋作用,增強界面附著力。
基層處理:
基層應堅硬、平整、干燥、潔凈、無裂縫、無油脂、無脫膜劑。如基層表面疏松或大面積浮漿,宜噴丸處理。底涂前砂磨基層并用吸塵器清理。
技術參數:
顏色: 乳白色
狀態: 液態
固含量: ≥17%
密度: 1.0kg/L
單耗: 約100-150kg/㎡
風干時間:水泥地坪或混凝土基層,2-4小時,實際應用時間根據現場溫度和相對空氣濕度進行調整。
施工方法:
水泥砂漿地坪的界面處理用本品按1:0.5兌水稀釋后用羊毛滾筒充分滾涂。對高吸收性基層須滾涂兩遍,混凝土地坪則無需兌水直接滾涂。工具和容器可以用水清洗。
適用基層:
乳液界面處理劑,用于墻地面吸收性基層如混凝土、水泥砂漿、硬石膏基層的底涂,即封閉基層的毛細孔和縫隙,降低多孔性基層的吸收性;同時增強基層的界面附著力,起粘接橋的作用。
注意事項:
本產品只適合在5℃~35℃的氣溫下使用。本說明書提供的數據是在23℃±2℃和50-55%的相對濕度下取得的。請注意,在其它氣候環境,固化的時間會相應延長或縮短。
包裝與儲存:18kg塑料桶包裝。本品須存放于室內5℃-35℃,防止冰凍、曝曬。保質期為12個月。
HENRY 509neo Primer For Self-Leveling
Uses:
For processing absorbent concrete / cement floor.
Features:
Aqueous polymer emulsion ;
Back Cover , reduce subfloor absorbent ;
Bonding bridging role in enhancing interfacial adhesion of old and new inorganic non-metallic materials ;
Economical and practical, large- area coating
Applicable Subfloor :
Emulsion primer treatment for wall and floor absorbent subfloor such as concrete, cement mortar , anhydrite subfloor primer , which closed the pores and cracks subfloor, subfloor lower porous absorbent ; while enhancing the interfacial adhesion subfloorsubfloor , acts as an adhesive bridge. By subfloor primer can be constructed after HENRY self-leveling layer.
Primary Treatment:
Subfloor should be hard, smooth, dry, clean, no cracks , no fat , no release agent. If a large area of ??subfloor or loose surface laitance , should peening. Subfloor primer before sanding and use a vacuum cleaner to clean up.
Technical Parameters:
Color : White
State: Liquid
Solid Content : ≥ 17%
Density : 1.0kg / L
Consumption : About 100-150g/㎡
Drying Time : Cement floor or concrete base , 1-2 hours ( wetting fluid can be no self-leveling construction , do not wait too long ) practical application ( according to the site temperature and relative air humidity adjustment ) .
Construction Method:
Cement mortar floor interface treatment by HENRY 509neo 1:0.5 watered sufficiently diluted with wool drum roll . Subfloor required for highly absorbent roll twice, you do not need watered concrete floor directly roll . Tools and containers can be cleaned with water .
Note:
This product only suitable for use at temperatures of 5 ℃ to 35 ℃ . Data provided in this manual is at 23 ℃ ± 2 ℃ and 50-55 % relative humidity achieved . Please note that in other climates , the curing time will be extended or shortened.
Packaging and Storage:
18kg plastic pails. The product shall be kept at room 5 ℃ -35 ℃, prevent freezing, exposure. Shelf life is 12 months.